turck BL20 Series - 9.1.3 Wiring diagram; 9.1.4 Process data mapping

Digital Output Modules
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
218
 with tension clamp connection
BL20-S3T-SBC
BL20-S4T-SBCS
 with screw connection
BL20-S3S-SBC
BL20-S4S-SBCS
9.1.3 Wiring diagram
9.1.4 Process data mapping
m = Offset of output data; depending on extension of station and the corresponding fieldbus.
Fig. 163: Wiring diagram BL20-S3x-SBC
Fig. 164: Wiring diagram BL20-S4x-SBCS
Data Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Output m - - - - - - DO2 DO1
NOTE
With PROFIBUS, PROFINET and CANopen, the I/O data of this module is localized within
the process data of the whole station via the hardware configuration tool of the fieldbus
master.
For DeviceNet, EtherNet/IP and Modbus TCP a detailed mapping table can be created with
the TURCK BL20 DTM in PACTware.
23
22
21
13
12
11
SS
––
PE PE
SS
23
22
21
13
12
11
––
2414
PE
+
PE
+