75
2020/09
Diagnostics
This module has the following diagnostic data per channel:
7.8.6 Module parameters
24 Green Status channel 4 = 1
Red Short circuit or wire break
Off Status channel 4 = 0
NOTE
The numbering of the channel LEDs corresponds to the numbering of the connectors at the
base module.
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Wire
break 4
Overcur-
rent 4
Wire
break 3
Overcur-
rent 3
Wire
break 2
Overcur-
rent 2
Wire
break 1
Overcur-
rent 1
NOTE
The actual configuration files (GSD-, GSDML-, EDS-files) with the new parameters can be
found under www.turck.com.
If you use older configuration files with old parameter texts (issue date before April 2014),
then you can find a cross reference list in the manual's appendix (see Cross reference list
parameters (page 523)).
LED Display Meaning Remedy
To Next Page
Loading...
