217
2020/09
9.1.2 Base modules
Delay at signal change and resistive load
From low to high level < 100 s
From high to low level < 100 s
Load impedance range 1 k
Synchronization factor 100 %
Resistive, inductive and lamp loads can be connected
Load impedance, resistive R
LO
Min. 48
Load impedance, inductive R
LI
Max. 1.2 H
Lamp load R
LL
Max. 3 W
Switching frequency
Resistive load 5 kHz (R
LO
< 1 k)
Lamp load 10 Hz
Short-circuit proof According to EN 61 131
Fig. 161: Base module BL20-S3T-SBC
Fig. 162: Base module BL20-S4T-SBCS
Technical data
To Next Page
Loading...
