turck BL20 Series - 7.10.2 Wiring diagram; 7.10.3 Process data mapping

83
2020/09

with screw connection
BL20-B3S-SBB
BL20-B4S-SBBC
7.10.2 Wiring diagram
7.10.3 Process data mapping
n = offset of input data; depending on extension of station and the corresponding fieldbus.
Fig. 87: Wiring diagram BL20-B3x-SBB
Fig. 88: Wiring diagram BL20-B4x-SBBC
Data Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Input n DI8 DI7 DI6 DI5 DI4 DI3 DI2 DI1
n + 1 DI16 DI15 DI14 DI13 DI12 DI11 DI10 DI9
NOTE
With PROFIBUS, PROFINET and CANopen, the I/O data of this module is localized within
the process data of the whole station via the hardware configuration tool of the fieldbus
master.
For DeviceNet, EtherNet/IP and Modbus TCP a detailed mapping table can be created with
the Turck BL20 DTM in PACTware.
Process data Value Meaning
DIx 0 Digital input inactive
1 Digital input active
163
162
161
153
151
23
22
21
13
12
11
S
–
+
S
–
+
152
23 163
22 162
21 161
13 153
12 152
11 151
SS
––
++
PE PE
24 16414 154