turck BL20 Series - 9.5.2 Wiring diagram; 9.5.3 Process data mapping

237
2020/09
9.5.2 Wiring diagram
9.5.3 Process data mapping
m = Offset of output data; depending on extension of station and the corresponding fieldbus.
Fig. 187: Wiring diagram
Data Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Output m DO8 DO7 DO6 DO5 DO4 DO3 DO2 DO1
NOTE
With PROFIBUS, PROFINET and CANopen, the I/O data of this module is localized within
the process data of the whole station via the hardware configuration tool of the fieldbus
master.
For DeviceNet, EtherNet/IP and Modbus TCP a detailed mapping table can be created with
the TURCK BL20 DTM in PACTware.
Process data Value Meaning
DOx 0 Digital output inactive
1 Digital output active
24 VDC
GND
S
S
S
S
S
S
S
S