29
2020/09
5 General Technical Data of BL20 Modules
This chapter describes the general Technical data valid for all BL20 modules.
The following chapters contain all information about the BL20 I/O, power supply and base modules
as well as all module specific Technical data.
5.1 Station dimensions
5.1.1 Dimensions for electronics modules
5.1.2 Dimensions for base modules
NOTE
The Technical data, diagnostic options as well as the parameterizing options for the gate-
ways as well as all other fieldbus specific information are described in the bus-specific
manuals for the BL20 gateways.
An overview of all electronic modules and the appropriate base modules can be found in
the Appendix.
Dimensions in mm / inch (w × l × h)
Slice design 12.6 × 74.1 × 55.4 / 3.97 × 2.92 × 2.18
Block design 100.8 × 74.1 × 55.4 /3.97 × 5.07 × 1.96
Dimensions in mm / inch (w × l × h)
Slice design
2-/3-wire connection technology 12.6 × 117.6 × 49.9 /3.97 × 5.07 × 1.96
4-wire connection technology 12.6 × 128.9 × 49.9 /3.97 × 5.07 × 1.96
4 × 2-/3-wire connection technology 12.6 × 154.5 × 49.9 /3.97 × 5.07 × 1.96
Block design
2-/3-wire connection technology 100.8 × 117.6 × 49.9 /3.97 × 5.07 × 1.96
4-wire connection technology 100.8 × 128.9 × 49.9 /3.97 × 5.07 × 1.96
4 × 2-/3-wire connection technology 100.8 × 154.5 × 49.9 /3.97 × 5.07 × 1.96
To Next Page
Loading...
