Digital Output Modules
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
250
9.8.2 Wiring diagram
9.8.3 Process data mapping
m = Offset of output data; depending on extension of station and the corresponding fieldbus.
Fig. 197: Wiring diagram
Data Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Output m DO8 DO7 DO6 DO5 DO4 DO3 DO2 DO1
m + 1 DO16 DO15 DO14 DO13 DO12 DO11 DO10 DO9
NOTE
With PROFIBUS, PROFINET and CANopen, the I/O data of this module is localized within
the process data of the whole station via the hardware configuration tool of the fieldbus
master.
For DeviceNet, EtherNet/IP and Modbus TCP a detailed mapping table can be created with
the TURCK BL20 DTM in PACTware.
Process data Value Meaning
DOx 0 Digital output inactive
1 Digital output active
1
8
7
6
5
4
3
2
9
16
15
14
13
12
11
10
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
GND
L
To Next Page
Loading...
