turck BL20 Series - 5.2.1 Approvals; 5.2.2 Technical data of the base modules

General Technical Data of BL20 Modules
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
36
5.2.1 Approvals
5.2.2 Technical data of the base modules
Approvals
CE
cULus
BL20 BL20 Economy
Protection class IP 20 IP 20
Insulation stripping length 8 mm 8 mm
Max. wire range 0.5 to 2.5 mm
2
/20 to 12 AWG 0.14 to 1.5 mm
2
/6 to 16 AWG
Crimpable wire
”e” solid core H 07V-U 0.5 to 2.5 mm
2
/20 to 12 AWG 0.25 to 1.5 mm
2
/20 to 12 AWG
”f” flexible core H 07V-K 0.5 to 1.5 mm
2
/20 to 12 AWG 0.25 to 1.5 mm
2
/20 to 12 AWG
”f” with ferrules according to
DIN 46228/1 (ferrules crimped
gas-tight)
0.5 to 1.5 mm
2
/20 to 12 AWG 0.25 to 1.5 mm
2
/20 to 12 AWG
Plug gauge according to
IEC 947-1/1988
A1 A1
Max. torque for screw connec-
tion technology
0.4 to 0.6 Nm -
Measurement data according to VDE 0611 Part 1/8.92/ IEC 947-7-1/1989
Rated voltage 250 V 250 V
Rated current 10 A 10 A
Rated cross section 1.5 mm
2
1.5 mm
2
Rated surge 4 kV 4 kV
Rated temperature Min. 75 ° C Min. 75 °C
Pollution severity 2 2
TOP connection technology Tension clamp or screw connection Screw connection