Digital Input Modules
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
88
7.11.3 Process data mapping
n = offset of input data; depending on extension of station and the corresponding fieldbus.
Data Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Input n DI8 DI7 DI6 DI5 DI4 DI3 DI2 DI1
n + 1 DI16 DI15 DI14 DI13 DI12 DI11 DI10 DI9
NOTE
With PROFIBUS, PROFINET and CANopen, the I/O data of this module is localized within
the process data of the whole station via the hardware configuration tool of the fieldbus
master.
For DeviceNet, EtherNet/IP and Modbus TCP a detailed mapping table can be created with
the Turck BL20 DTM in PACTware.
Process data Value Meaning
DIx 0 Digital input inactive
1 Digital input active
To Next Page
Loading...
