Analog Output Modules
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
282
10.3.7 Measurement value representation
Substitute value Substitute value 0
1. The substitute value defined here will be sent in
consequence of certain events parameterized in the
gateway.
or
2. In case of a module bus error: The substitute value
defined here will be sent if the parameter ”Behavior
module bus error Ax” is set to ”output substitute
value”.
NOTE
A detailed description of the measurement value representation for the analog outoput
modules in 16 or 12 bit can be found in the Appendix, s. p. 16.
Parameters Value
To Next Page
Loading...
