277
2020/09
10.3.2 Base modules
with tension clamp connection
BL20-S3T-SBB
with screw connection
BL20-S3S-SBB
Inductive load R
LI
< 1 mH
Short-circuit current 40 mA
Transmission frequency < 100 Hz
Basic error at 23 °C / 73.4 °F < 0,2 %
Temperature coefficient 300 ppm/°C from end value
Settling time (maximum)
Resistive load 0.1 ms
Inductive load 0.5 ms
capacitive load 0.5 ms
Interference voltage suppression
Common-mode > 90 dB
Normal mode > 70 dB
Interference between channels > - 50 dB
Measurement value representation 16 bit signed integer/
12 bit full range, left-justified
NOTE
Negative values are automatically displayed as 0 V in a configured measurement range of
0…10 V.
Fig. 217: Base module BL20-S3T-SBB
Technical data
To Next Page
Loading...
