turck BL20 Series - 14.1.4 Mounting slot identification and color markers

471
2020/09
14.1.4 Mounting slot identification and color markers
Slot identification
Please observe:
 Dekafix labels can be used to label mounting slots. There is room for a six-digit label on every
base module. For example, the six-digit device short name, which you can define in the BL20
DTM. Dekafix labels must be attached before the electronics modules are mounted.
Procedure:
† Press the Dekafix labels into the recesses provided in the base module. There is room for a six-
digit label on every base module.
Color markers
Please observe:
 The base modules can be fitted with colored connection markers for the purposes of individual
identification of channels and to ease cable assignment. The colored connection markers are
available as accessories.
Fig. 306: Slot identification with Dekafix
Fig. 307: Color-coding of the connection levels