turck BL20 Series - 8.7.7 Measurement value representation

149
2020/09
The default values are written in bold.
8.7.7 Measurement value representation
Parameters Value
Measurement range 0 = 0…10 V/ 0…20 mA
1 = -10…+10 V/ 4…20 mA
Data format 0 = 15 bit + sign
1 = 12 bit (left-justified)
Deactivate all diagnostics 0 = no
1 = yes
Deactivate channel 0 = no
1 = yes
Mode 0 = voltage
1 = current
Data representation 0 = 15 bit + sign
1 = NE 43
2 = Extended Range
This parameter is only valid for modules with a ver-
sion
NOTE
A detailed description of the measurement value representation for the analog input
modules in 16 or 12 bit can be found in the Appendix, s. p. 493.