turck BL20 Series - 9.6.2 Base modules

Digital Output Modules
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
240
9.6.2 Base modules
 with tension clamp connection
BL20-B3T-SBC
 with screw connection
BL20-B3S-SBC
High level U
HIGH
Min. L+ (-1 V)
Output current
High level (nominal) 0.5 A
Permissible < 0.6 A
Delay at signal change and resistive load (R
LO
< 1 k)
From low to high level typ. 100 s
From high to low level typ. 100 s
Synchronization factor 100 %
Resistive, inductive and lamp loads can be connected
Load impedance, resistive R
LO
48 
Load impedance, inductive R
LI
Category DC 13 according to EN 60 947-5-1
Lamp load R
LL
Max. 3 W
Switching frequency
Resistive load 100 Hz (R
LO
< 1 k)
Short-circuit proof According to EN 61131-2
Fig. 190: Base module BL20-B3T-SBCS
Technical data