turck BL20 Series - 12.6.6 Wiring diagram and pin assignment

445
2020/09
Approved SWIRE slaves
The following slaves on the SWIRE bus are currently approved for the BL20-E-1SWIRE:
12.6.6 Wiring diagram and pin assignment
The following diagram is an example of the connected SWIRE power supply with a disconnection
function (emergency-off) for the coil supply of the SWIRE relays.
Insulation voltage between power supply of contac-
tors and the field voltage
500 V
eff
Insulation voltage between SWIRE and power supply
of contactors
none
Product standard EN 61131-2
Protection class IP 20
ID Device Manufacturer
0×20 SWIRE-DIL Moeller
Fig. 296: connection of the operating voltage for BL20-E-SWIRE with disconnectable coil power
supply
Technical data
U
AUX
U
SW
1
6
5
4
3
2