BL20 I/O System
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
24
4.1.5 Base modules
The field wiring is connected to the base modules. These are constructed as terminals in block and
slice designs and are available in the following variations with either tension clamp or screw
connections: 2-/3-wire (2-channel), 4-wire (2-channel) and 4 x 2-/3-wire (4-channel).
Fig. 5: Base module with tension clamp connection
Fig. 6: Base module with screw connection
Fig. 7: Base module in block design
To Next Page
Loading...
