turck BL20 Series - Page 277

275
2020/09
The default values are written in bold.
Measurement value representation
Parameters Value
Output range 0 = 0…20 mA
1 = 4…20 mA
Data format 0 = 15 bit + sign
1 = 12 bit (left-justified)
Deactivate channel 0 = no
1 = yes
Output on module bus error 00 = substitute value
01 = keep current value
Data representation 00 = standard
01 = NE 43
10 = extended range
Substitute value Substitute value 0
1. The substitute value defined here will be sent in
consequence of certain events parameterized in the
gateway.
or
2. In case of a module bus error: The substitute value
defined here will be sent if the parameter ”Behavior
module bus error Ax” is set to ”output substitute
value”.
NOTE
The measurement value tables for the parameter settings ”standard”, ”extended range”
and ”NE 43” can be found on s. p. 296 ff.