Analog Output Modules
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
306
Process output data
m = Offset of output data; depending on extension of station and the corresponding fieldbus.
Data Byte Byte DP/
PN
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Output m m + 3 AO1 LSB
m + 1 m + 2 AO1 LSB
m + 2 m + 1 AO2 LSB
m + 3 m AO2 MSB
Process data Meaning
AOx LSB low byte of the analog value
AOx LSB high byte of the analog value
NOTE
With PROFIBUS, PROFINET and CANopen, the I/O data of this module is localized within
the process data of the whole station via the hardware configuration tool of the fieldbus
master.
For DeviceNet, EtherNet/IP and Modbus TCP a detailed mapping table can be created with
the TURCK BL20 DTM in PACTware.
To Next Page
Loading...
