turck BL20 Series - Page 457

455
2020/09
The default values are written in bold.
Byte 8
Bit 0
Word 4
Bit 0
Byte 8
Bit 0
Device ID, slave x
Bit 1 Bit 1 Bit 1
Bit 2 Bit 2 Bit 2
Bit 3 Bit 3 Bit 3
Bit 4 Bit 4 Bit 4
Bit 5 Bit 5 Bit 5
Bit 6 Bit 6 Bit 6
Bit 7 Bit 7 Bit 7
…
… …
Byte 24
Bit 0
Word 16
Bit 0
Byte 24
Bit 0
Bit 1 Bit 1 Bit 1
Bit 2 Bit 2 Bit 2
Bit 3 Bit 3 Bit 3
Bit 4 Bit 4 Bit 4
Bit 5 Bit 5 Bit 5
Bit 6 Bit 6 Bit 6
Bit 7 Bit 7 Bit 7
Parameter name Value
Byte 1
Disable Cfg If the physical structure of the SWIRE bus does not match the configuration stored in the
BL20-E-1SWIRE on power up (SW LED flashing), the physical structure of the SWIRE bus
must be stored in the BL20-E-1SWIRE.
inactive Manual SWIRE configuration
To store the physical structure of the SWIRE bus in the BL20-E-1SWIRE,
the CFG button of the BL20-E-1SWIRE must be pressed manually (only
functions if the SW LED is flashing).
active Automatic SWIRE configuration
If the physical structure of the SWIRE bus does not match the configu-
ration stored in the BL20-E-1SWIRE on power up, the physical structure
is stored automatically in the BL20-E-1SWIRE.
Standard
PROFIBUS
PROFINET
Parameters
byte-
oriented
word-
oriented