457
2020/09
PKZ
ERR
Group PKZ error field
Activate slave diagnostics PKZ
ERR
. As soon as a slave on the bus clears its PKZ bit, this is indi-
cated as an individual error depending on the parameter setting.
active Single diagnostics is activated
inactive Single diagnostics is not activated
TYP
INFO
Configuration error field
As soon as a SWIRE-DIL slave on the bus clears its PKZ bit, this is indicated as an individual
error depending on the parameter setting.
active Single diagnostics is activated
inactive Single diagnostics is not activated
TYP
ERR
Group configuration error field
Activate slave diagnostics TYP
ERR
. As soon as only one slave on the bus is incorrectly con-
figured, this is indicated as an error depending on the parameter setting.
active Group diagnostics is activated
inactive Group diagnostics is not activated
U
AUXERR
Error message UAUX-
Activate system diagnostics U
AUXERR
. U
AUXERR
will generate an error message as soon as the
power supply goes below a level at which the function of the relays is not guaranteed.
active Error message U
AUXERR
activated
inactive Error message U
AUXERR
not activated
Byte 3 reserved
Byte 4
reserved
(life guarding
time up to ver-
sion VN 01-03)
Up to version VN 01-03: Lifeguarding time of the SWIRE slaves. Lifeguarding time of the
SWIRE slaves
0×02-0×FF
0×64
Lifeguarding time of the SWIRE slaves
Setting of lifeguarding time, timeout time up to automatic reset of the
slaves in the event of communication failure. (n * 10ms) (default 1s)
0×FF: Lifeguarding off
Byte 5 - 6
SC
DIAG
Sx Input bit communication error, slave x
Slave diagnostics message from Byte 1 / Bit 7 is accepted in the check-back interface as Bit
4
active SC
DIAG
Sx is accepted
inactive SC
DIAG
Sx is not accepted
Byte 7, 8 reserved
Byte 9…24
Device ID, slave
x
TYPE setting for the SWIRE slave at position x on the SWIRE bus
0×20 SWIRE-DIL-MTB (: 0×FF)
0×FF Basic setting (no slave)
Parameter name Value
To Next Page
Loading...
