turck BL20 Series - Page 505

503
2020/09
The value range:
-200 °C…-0.1°C
is displayed as follows:
830
hex
…FFF
hex
(decimal: -2000…-1)
The value range:
0 °C…150°C
is displayed as follows:
000
hex
…5DC
hex
(decimal: 0…1500)
For representation of resistance values only positive numbers (hexadecimal/binary) are used. The
positive values can easily be converted into decimal ones.
The resistance values can now be calculated according to the parameterization.
The value range:
0 to100 ;
0 to 200 ;
0 to 400 ;
0 to 1000 ;
is displayed as follows:
000
hex
…FFF
hex
(decimal: 0 to 4095).
The following equations are valid:
”Resistance, 0…100 Ohm”:
”Resistance, 0…200 Ohm”:
”Resistance, 0…200 Ohm”:
”Resistance, 0…1000 Ohm”:
Resistance value = 0.02442 × decimal value
Resistance value = 0.04884  × decimal value
Resistance value = 0.09768 × decimal value
Resistance value = 0.24420 × decimal value