u-blox ZED-F9P - UBX-INF-WARNING (0 X04 0 X01)

u-blox ZED-F9P Interface Description - Manual
Advance Information
5.10.5 UBX-INF-WARNING (0x04 0x01)
5.10.5.1 ASCII output with warning contents
Message
UBX-INF-WARNING
Description
ASCII output with warning contents
Firmware
Supported on:
• u-blox 9 with protocol version 27
Type
Output
Comment
This message has a variable length payload, representing an ASCII string.
Header Class ID Length (Bytes) Payload Checksum
Message Structure
0xB5 0x62 0x04 0x01 0 + 1*N
see below
CK_A CK_B
Payload Contents:
Byte Offset Number
Format
Scaling Name Unit Description
Start of repeated block (N times)
N*1 CH - str - ASCII Character
End of repeated block
UBX-18010854 - R04 Advance Information Page 92 of 259