u-blox ZED-F9P - Page 185

u-blox ZED-F9P Interface Description - Manual
Advance Information
Name Description
leapSec
Leap seconds have been determined
clkReset
Clock reset applied. Typically the receiver clock is changed in increments of integer milliseconds.
Bitfield prStdev
This graphic explains the bits of prStdev
Name Description
prStd
Estimated pseudorange standard deviation
Bitfield cpStdev
This graphic explains the bits of cpStdev
Name Description
cpStd
Estimated carrier phase standard deviation
Bitfield doStdev
This graphic explains the bits of doStdev
Name Description
doStd
Estimated Doppler standard deviation
Bitfield trkStat
This graphic explains the bits of trkStat
UBX-18010854 - R04 Advance Information Page 177 of 259