Vaisala RVP900 - Figure 35 Ideal and Actual Linear -FM Spectrum Displayed in Ps Plot

4. If needed, use the Ps plotting command to examine the ideal transmit spectrum and
received spectrum of compressed pulses.
The following example shows a 60 MHz, 40 μsec linear FM pulse having a bandwidth of
2 MHz. The energy in the pulse is sharply contained within and uniformly distributed
over the 2 MHz frequency interval centered on the IF carrier.
This shows the ability of synthesized transmit waveforms to remain cleanly in their
allocated bounds.
Figure 35 Ideal and Actual Linear -FM Spectrum Displayed in Ps Plot
Chapter 6 – Plot-assisted Setups
167