Vaisala RVP900 - Power up Check; Table 89 Power up Checklist

Task Checked OK/Not
OK
Remarks
Klystron Systems
IF COHO is connected to J13 ADC–E of RVP901.
Tx license key is installed (circle one):
• Yes
• No
Test Passed
For Customer Date:
For Vaisala Date:
A.4 Power Up Check
Test Goal
Verify that RVP901 and RVP902 properly power up.
To run the test, apply power to RVP902 (or reset it) and RVP901.
Checklist
Table 89 Power Up Checklist
Task Checked
OK/Not OK
Remarks
When power is applied to RVP901:
• Red and green lights (D7) may blink on boot and then green light is solid
• The red light is solid if software is running on server and blink if software is
not running.
When the CAT5E cable is disconnected from either RVP902 server or RVP901:
• Green light (D7) remains on.
• Red light blinks indicating it has lost connection to the software.
Test Passed
For Customer Date:
For Vaisala Date:
RVP900 User Guide M211322EN-J
342