2.3 Safety
Turn o power to the main chassis before installing or removing PCI
boards. Disconnect the line cord should be disconnected before opening either the IFD
module or main chassis.
WARNING!
If IFDR is equipped with AC power option and installed in a 220V
application, a fuse must be included in the neutral input path of the end product for
compliance with IEC 60601-1:2005.
WARNING!
IFDR must be installed in a suitable fire enclosure to meet EN60950-1
requirements.
WARNING!
The IFDR mains power must be permanently wired in a NEMA electrical
enclosure that is accessible only to a trained technician. The ground (earth) connection
should be attached directly to the IFDR case mounting screw, and then brought to the
power supply ground connection.
WARNING!
Disconnect the mains power before opening the IFDR for service. The
IFDR is best serviced by disconnecting the mains power, removing it from its mount,
and placing it on a bench.
WARNING!
Never open the IFDR for field-level services. Thermal conductive material
does not bind properly when unit is reassembled. Opening RVP901 voids all
warranties.
WARNING!
Do not modify the unit. Improper modification can damage the product or
lead to malfunction.
CAUTION!
RVP900 User Guide M211322EN-J
18
To Next Page
Loading...