Function Name Description
rim_pldreset
Reboots the board returning it to its original power on
state
rim_led_clrset
Controls the test output LED state
rim_board_sw_status_set*
Configures the embedded processors performance
monitor
rim_board_sw_status_get*
Returns status of the embedded processors performance
rim_board_sw_errlog_set*
Configures the boards error message logging functionality
rim_board_sw_errlog_get*
Gets error log messages
rim_testport_set*
Configures the signal test port header
rim_testport_get*
Gets the current configuration of the signal test port
header
Table 139 RIM API 6-Level Weather Functions
Function Name Description
rim_sio_reset
Resets the 6-level weather hardware and status and loads
default line state
rim_sio_setclock
Sets the baud rate and clock phase of the 6-level weather
interface
rim_sio_setidle
Sets the idle pattern of the 6-level weather interface
rim_sio_sendbuf
Sends data to be transmitted to the 6-level weather
interface
rim_sio_readbuf*
Reads data back from 6-level weather interface if it is in
loopback mode
rim_sio_leds
Places the 6-level weather LEDs in normal or override
operation
rim_sio_setconfig*
Sets all of the 6-level weather interface configuration
parameters in one call
rim_sio_getconfig*
Gets current value of all of the 6-level weather interface
parameters
rim_sio_getstatus*
Gets current status of 6-level weather interface
Table 140 RIM API Diagnostic IO Functions
Function Name Description
rim_set_out_state*
Configures forced state and output value the user
specified outputs
rim_get_out_state*
Gets the forced state and output value of all outputs
Appendix G – RCP903 ASR9-WSP Panel
449
To Next Page
Loading...