Utility Description
DspExport Exports RVP900 to another workstation over the network. This allows utilities on a
remote network to run locally, instead of exporting the utility display window over the
network.
Improves the performance of the utilities for network applications by letting them be run
on the workstation that is remote from the RVP900. The standard X-Window export is
supported, but requires more bandwidth.
Setup Interactive GUI for creating and editing RVP900 configuration files
Zauto Calibration utility for use with a test signal generator
Table 12 Radar Application Software
Application Description
IRIS/Radar The package provides complete local and remote control/monitoring, data processing,
and communication for a radar system.
• Runs on the same or separate PC.
• Interfaces to RVP900 internally or by 100 BaseT Ethernet.
• Controls RVP900 and RCP8 radar/antenna control processor.
IRIS/Analysis Functions as a radar product generator (RPG) to provide outputs such as CAPPI, rain
accumulations, echo tops, automatic warning and tracking, and so on.
Optional software packages are provided for certain applications: wind shear and
microburst detection, hydrometeorology with raingage calibration and subcatchments,
composite, dual Doppler, and 3D Display.
Runs on a separate PC, often at a central site.
One IRIS/Analysis can support up to 20 radar systems.
IRIS/Focus Provides IRIS displays to network users on standard PC (Windows or Linux) running
standard browsers.
IRIS/Display Displays products sent to it and, with password authorization, can serve as a remote
control and monitoring site for networked radar systems.
Includes features such as looping, cross-section, track, local warning, and annotation.
IRIS/Analysis and IRIS/Radar include the capabilities of IRIS/Display. Any IRIS system can
display products
3.9 Network Architecture
RVP900 can run on a network to support remote control and monitoring, subject to the
user's security restrictions.
Chapter 3 – Functional Description
51
To Next Page
Loading...