Table 144 RIM API Data Processing Controls
Function Name Description
rim_asr9_set_run
Sets the RCP903 processing state
rim_asr9_set_run_cmd
Gets the RCP903 processing state that is currently being
requested
rim_asr9_get_run
Gets the RCP903 processing state that is currently
running
rim_asr9_set_udp_addr*
Sets the UDP address and port information for the I/Q
data stream
rim_asr9_get_udp_addr*
Gets the UDP address and port information for the I/Q
data stream
rim_asr9_iqdata_status*
Gets the current status of the I/Q Data Interface
Table 145 RIM API Simulated Controls
Function Name Description
rim_asr9_asr9_simclocks
Sets the simulation state of the ASR9 clocks
rim_asr9_asr9_simclocks_get
Gets the simulation state of the ASR9 clocks
rim_asr9_simantenna
Sets the simulation state of the antenna signals
(WP_ACP, WP_ARP)
rim_asr9_simantenna_get
Gets the simulation state of the antenna signals
(WP_ACP, WP_ARP)
rim_asr9_simiq
Sets the simulation state of the I/Q data
rim_asr9_simiq_get
Gets the simulation state of the I/Q data
srim_asr9_simiq_data_get*
Gets the simulation values of the I/Q data
rim_asr9_simtrigs
Sets the simulation state of the PRET0
rim_asr9_simtrigs_get
Gets the simulation state of the PRET0
rim_asr9_swst_sim_set
Sets the operational mode and simulation override value
of a single ASR9 status input
rim_asr9_swst_sim_get
Gets the operational mode and simulation override value
of a single ASR9 status input
rim_asr9_swcnt_sim_set
Sets the operational mode and simulation override value
of a single ASR9 control output
rim_asr9_swcnt_sim_get
Gets the operational mode and simulation override value
of a single ASR9 control output
rim_asr9_103104sts_sim_set
Sets the operational mode and simulation override
values for the WP_SW103 and WP_SW104 input levels
rim_asr9_103104sts_sim_get
Gets the operational mode and simulation override
values for the WP_SW103 and WP_SW104 input levels
Appendix G – RCP903 ASR9-WSP Panel
451
To Next Page
Loading...