Vaisala RVP900 - Archive on Local RVP900

J-ID Label Type Description Use
J9
CLK OUT
SMA Reference clock output --
J10
DDS
SMA Direct digital synthesizer output --
J11
TxDAC-B
SMA Direct transmit IF output --
J12
TxDAC-A
SMA Same as J11 --
J13A
ADC-A
SMA Direct IF input. IF-1 for single
channel
J13B
ADC-B
SMA Direct IF input.
Interface-2 for 2nd polarization
--
J13C
ADC-C
SMA Direct IF input --
J13D
ADC-D
SMA Direct IF input --
J13E
ADC-E
SMA Direct IF input.
Burst sample input
J14
VIDEO OUT
SMA Video DAC output --
J15
TRIG-A
SMA General purpose trigger I/O or
DAFC interface
--
Figure 80 Vaisala Supplied, Bay 4
G.6.3
RCP903 ASR9-WSP Panel Interfaces
Table 129 RCP903 ASR9-WSP Panel Connectors Defined for Customer's Systems
Implementation
Connector Size Designator Type Destination
D-SUB STR 50 POSITION J1 RCPT ASR9 / WSP#1
D-SUB STR 50 POSITION J2 RCPT ASR9 / WSP#2
D-SUB STR 9 POSITION J3 RCPT COM1
D-SUB STR 9 POSITION J4 RCPT COM2
RJ45 J5 - ETHERNET
D-SUB STR 62 POSITION J6 RCPT RVP901-WSP IO-A
D-SUB STR 9 POSITION J7 PLUG POWER (+24V)
Appendix G – RCP903 ASR9-WSP Panel
441