Vaisala RVP900 - Setup Mc Command (Board Configuration)

6. Record the Az, El, Range and Phase Noise:
Az: ______ El:______ Range: ______ Phase Noise:______
Az: ______ El:______ Range: ______ Phase Noise:______
Az: ______ El:______ Range: ______ Phase Noise:______
Az: ______ El:______ Range: ______ Phase Noise:______
Az: ______ El:______ Range: ______ Phase Noise:______
Az: ______ El:______ Range: ______ Phase Noise:______
Checklist
Table 109 Receiver Phase Noise Checklist
Task Checked OK/Not OK Remarks
Test procedure completed successfully.
Test Passed
For Customer Date:
For Vaisala Date:
A.25 Hardcopy and Backup of Final
Setups
Test Goal
Make a hardcopy of all the
final setups and attach to the tests.
Test Equipment
KVM connected
Printer or ftp access to a computer that supports a printer
TTY Setups Hardcopy Listing
1. Start script logging with the commands:
cd /usr/sigmet/config/listings
script RVP900.26feb09
2. Enter the TTY setups and type the ?? command to list all TTY setups.
3. Exit dspx and script logging by typing: exit
RVP900 User Guide M211322EN-J
366