Vaisala RVP900 - J3 and J4 RS-232 Interfaces to RVP902-WSP Processor; J5 - Ethernet Interface; Table 133 Pin-Out for J3 and J4 RS-232 Serial Interface; Table 134 Pin-Out for J6 RJ-45 Interface

G.6.7 J3 and J4 RS-232 Interfaces to RVP902-WSP Processor
Table 133 Pin-out for J3 and J4 RS-232 Serial Interface
Pin Number Signal Name Type Direction Description
1 No Connect RS-232 NC
2 RXD (TXD on WSP
interface)
RS-232 Input Receive Data
3 TXD (RXD on WSP
interface)
NC Output Transmit Data
4 No Connect NC Output
5 GND GND GND Ground
6 No Connect NC NC
7 No Connect NC Output
8 No Connect NC NC
9 No Connect NC NC
G.6.8 J5 - Ethernet Interface
RJ45 Ethernet Interface provides 100/1000 Base-T communication with RVP902-WSP
Processor direct or through a network switch. This interface requires Jumbo Frames. RJ-45
signal interface cable side pin out.
Table 134 Pin-out for J6 RJ-45 Interface
J6 Pin Number Signal Name Description
1
TRP1+
Positive side of Twisted Pair A
2
TRP1-
Negative side of Twisted Pair A
3
TRP2+
Positive side of Twisted Pair B
4
TRP3+
Positive side of Twisted Pair C
5
TRP3-
Negative side of Twisted Pair C
6
TRP2-
Negative side of Twisted Pair B
7
TRP4+
Positive side of Twisted Pair D
8
TRP4-
Negative side of Twisted Pair D
Appendix G – RCP903 ASR9-WSP Panel
445