D.7.5 TS Playback from a Separate Archive Host to an RVP900
Figure 66 TS Playback from a Separate Archive Host
This is the recommended mode of operation.
In this example, the TS Switch is set to write data from the tsarchive to the TS API.
tsexport sends these through a UDP broadcast over the network to an RVP900 for
processing.
The diagram for the corresponding RVP900 would be identical to the one shown in this
example, except the TS Switch would be set to write data from the tsimport process.
Utility Settings
RVP900:
• TS Switch: Network
• TS Archive: N/A
Archive Host:
• TS Switch: Local Archive
• TS Archive: Play
Appendix D – Time Series Recording
405
To Next Page
Loading...