Vaisala RVP900 - ASR9 RIM Software API; Table 137 Pin-Out for J7 Power Input; Table 138 RIM API Board Status Functions

Table 137 Pin-out for J7 Power Input
J6 Pin Number Signal Name Description
1
PWR_IN
24 V nominal input power
2
PWR_IN
24 V nominal input power
3
NC
4
PWR_RETURN
Return path (ground) for input
power
5
PWR_RETURN
Return path (ground) for input
power
6
PWR_IN
24 V nominal input power
7
PWR_IN
24 V nominal input power
8
PWR_RETURN
Return path (ground) for input
power
9
PWR_RETURN
Return path (ground) for input
power
G.7 ASR9 RIM Software API
The RxNet7 Radar Interface Module (RIM) API functionality has been ported to RVP902-
WSP and modified to use the RCP903 Panel Ethernet Interface for control and status
functionality.
New functions (marked with a *) allow monitoring of board status and manufacturing tests.
Commands that are no longer needed because those physical interfaces no longer exist
have been deprecated. See Table 146 (page 452).
For more information on the functions, see the code comments.
Table 138 RIM API Board Status Functions
Function Name Description
rim_board_status*
Returns the boards complete operational status of all
hardware interfaces
rim_board_status_clear*
Clears persistent error status bits from designated
hardware interface
rim_asr9_flash_status*
Returns the status of the flash memory contents
rim_asr9_brd_status*
Returns the status of the boards voltage and temperature
rim_board_revlevel
Returns the hardware revision level
rim_software_revlevel
Returns the software revisions level
RVP900 User Guide M211322EN-J
448