4. RVP Hardware
4.1 Hardware System Overview
RVP900 hardware installation includes mechanical installation and siting, electrical
specifications of the interface signals, system-level considerations, and the standard
connector panel.
The major modules supplied with RVP900 are:
• RVP901 IF Digital Receiver (IFDR), which is typically mounted in the radar receiver
cabinet.
• RVP902 main chassis, which is usually mounted in a 19" EIA rack
Much of the RVP900 I/O is
configured through software. Since there is no custom wiring,
internal jumpers, or oscillators, it is easy to insert spare modules. See E. Serial Status
Formats (page 417).
Chapter 4 – RVP Hardware
53
To Next Page
Loading...