Figure 3 Calibration Plot for RVP901
Frequency measurement for AFC output (from burst sample)
See 7.2.3 Automatic Frequency Control (AFC) (page 176).
I and Q calculation over a wide dynamic range (WDR)
The RVP902 signal processing computer processes the I and Q values to obtain the moment
data (for example, Z, V, W, or polarization variables).
IF band pass
filtering
See 3.1.3.2 Digital IF Band Pass Design Tool (page 27).
Phase measurement and correction of transmitted pulse for magnetron
systems (from burst sample)
The following table shows the RVP900 real-time signal corrections to the I/Q samples from
the Rx.
Chapter 3 – Functional Description
25
To Next Page
Loading...