Vaisala RVP900 - Checking Processing Options with Setup Mp Command; Table 93 Processing Options Setup Checklist

Task Checked OK/Not OK Remarks
Status information is correct and shows no faults.
See 5.2.2 Mc — Top-level Configuration (page 102).
Parameters have been set.
Test Passed
For Customer Date:
For Vaisala Date:
A.8 Checking Processing Options with
Setup Mp Command
Test Goal
Verify that the TTY setups for the Processing Options section are properly configured for
the customer application.
Test Equipment
KVM connected
Test Procedure
1. Enter the TTY setups through dspx.
2. Issue the Mp command.
Checklist
Table 93 Processing Options Setup Checklist
Task Checked OK/Not OK Remarks
Test procedure completed successfully.
See 5.2.4 Mp — Processing Options (page 107).
Test Passed
For Customer Date:
For Vaisala Date:
RVP900 User Guide M211322EN-J
346