Vaisala RVP900 - Sample Noise Level (SNOISE)

Word Description
20 Noise Trigger Period
21 Pulse Width 0 min. Trig. Period
22 Pulse Width 1 min. Trig. Period
23 Pulse Width 2 min. Trig. Period
24 Pulse Width 3 min. Trig. Period
25 Pulse Width Bit Patterns
26 Current/Pulse Width
27 Current Trigger Gen. Period
28 Desired Trigger Gen. Period
29 PRT at Start of Last Ray
30 PRT at End of Last Ray
31 Processing/Threshold Flags
32 Log Slope
33 LOG Threshold
34 CCOR Threshold
35 SQI threshold
36 SIG Threshold for Width
37 Calibration Reflectivity
38 Reserved
39 Reserved
40 Range Averaging Choice
41 Reserved
42 Reserved
43 Header configuration of PROC data
44 I-Squared Noise (Low 16-bits)
45 I-Squared Noise (High 16-bits)
46 Q-Squared Noise (Low 16-bits)
47 Q-Squared Noise (High 16-bits)
48 Log of Measured Noise Level
49 LOG Noise Standard Deviation
50 Horizontal/Vertical Noise Ratio
51 AFC/MFC Control Value
52 Interference Filter Select
RVP900 User Guide M211322EN-J
272