Vertiv Liebert STS2 - Page 152

Vertiv™ | Liebert® STS2/PDU
™
User Manual | Rev. 6 | 10/2017 142
INPUT CONTACT #3
Input Contact Isolator #3
Occurrence of the indicated external event has been detected by Input Contact Isolator #3 of the Open Comms
Digital Input option board.
Press SILENCE on the touchscreen to turn off the audible alarm, if so configured. If you are accessing the
Liebert STS2/PDU system from a terminal, type SH and press RETURN on your keyboard to turn off the
audible alarm.
The event, with its assigned name, was written to the Event Log, if so configured.
The alarm has triggered a message to be sent to the modem, if so configured.
If configured to be a latching alarm, press RESET on the display. If you are accessing the unit from a terminal,
type CA and press RETURN on your keyboard.
INPUT CONTACT #4
Input Contact Isolator #4
Occurrence of the indicated external event has been detected by Input Contact Isolator #4 of the Open Comms
Digital Input option board.
Press SILENCE on the touchscreen to turn off the audible alarm, if so configured. If you are accessing the
Liebert STS2/PDU system from a terminal, type SH and press RETURN on your keyboard to turn off the
audible alarm.
The event, with its assigned name, was written to the Event Log, if so configured.
The alarm has triggered a message to be sent to the modem, if so configured.
If configured to be a latching alarm, press RESET on the display. If you are accessing the unit from a terminal,
type CA and press RETURN on your keyboard.
INPUT CONTACT #5
Input Contact Isolator #5
Occurrence of the indicated external event has been detected by Input Contact Isolator #5 of the Open Comms
Digital Input option board.
Press SILENCE on the touchscreen to turn off the audible alarm, if so configured. If you are accessing the
Liebert STS2/PDU system from a terminal, type SH and press RETURN on your keyboard to turn off the
audible alarm.
The event, with its assigned name, was written to the Event Log, if so configured.
The alarm has triggered a message to be sent to the modem, if so configured.
If configured to be a latching alarm, press RESET on the display. If you are accessing the unit from a terminal,
type CA and press RETURN on your keyboard.
INPUT CONTACT #6
Input Contact Isolator #6
Occurrence of the indicated external event has been detected by Input Contact Isolator #6 of the Open Comms
Digital Input option board.
Press SILENCE on the touchscreen to turn off the audible alarm, if so configured. If you are accessing the
Liebert STS2/PDU system from a terminal, type SH and press RETURN on your keyboard to turn off the
audible alarm.
The event, with its assigned name, was written to the Event Log, if so configured.
The alarm has triggered a message to be sent to the modem, if so configured.
If configured to be a latching alarm, press RESET on the display. If you are accessing the unit from a terminal,
type CA and press RETURN on your keyboard.