Vertiv Liebert STS2 - 17.0 CUSTOMER SETTINGS; 17.1 Programmable Relay Board Settings

Vertiv™ | Liebert® STS2/PDU
™
User Manual | Rev. 6 | 10/2017 146
17.0 CUSTOMER SETTINGS
17.1 Programmable Relay Board Settings
The optional programmable relay board (PRB) has eight channels to report events to an external device. Up to
ten (10) events can be programmed to each channel. See 6.1 - Programmable Relay Board for more information
on the PRB.
If your Liebert STS2/PDU has the PRB option installed, list the settings below for future reference. If control
power is lost in the Liebert STS2/PDU, the settings are not saved.
Table 32 Programmable relay board settings record
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
Channel 6