Vertiv Liebert STS2 - Input Contact Isolator Settings

Vertiv™ | Liebert® STS2/PDU
™
User Manual | Rev. 6 | 10/2017 148
17.2 Input Contact Isolator Settings
The Input Contact Isolator board (ICI) provides a Liebert STS2/PDU module interface for up to eight external
user alarm or message inputs to be routed through the Liebert STS2/PDU’s alarm network. See 6.2 - Input
Contact Isolator Board for more information on the ICI.
If your Liebert STS2/PDU has the ICI option installed, list the settings below for future reference. If control power
is lost in the Liebert STS2/PDU, the settings are not saved.
Table 33 Input contact isolator settings record
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
Channel 6
Channel 7
Channel 8