Vertiv™ | Liebert® STS2/PDU
™
User Manual | Rev. 6 | 10/2017 7
3.0 LOCATING THE LIEBERT STS2/PDU
This section provides instructions for leveling the Liebert STS2/PDU and anchoring the unit to the floor, should
that be required.
3.1 Anchoring the Unit to the Floor
The Liebert STS2/PDU can be anchored to the concrete floor to ensure stability for the unit in the event of
seismic activity.
3.2 Positioning the 250A Only Liebert STS2/PDU Without Anchoring
The 250A Liebert STS2/PDU is furnished with casters and stabilizing feet. After final positioning of the unit,
adjust the stabilizing feet located in each corner of the frame base to stabilize the unit.
For stabilizing feet details, see Figures 7 through 11.
To Next Page
Loading...
