Industrial 1.6L Engine Mechanical 1-87
Installation Procedure
1. Position alternator in alternator support and hand–tighten
lower alternator fastening bolt.
2. Attach cable connections to alternator.
3. Attach alternator and wiring harness bracket to alterna-
tor shackle.
Tighten
Tightening torque 20 Nm/ 15 lb. ft.
4. Clip cable bundle to cable bundle bracket.
5. Attach alternator support to alternator and intake mani-
fold.
Tighten
Tightening torque 20 Nm / 15 lb. ft.
6. Install lower alternator fastening bolt.
Tighten
Tightening torque 35 Nm/ 26 lb. ft.
7. Install ribbed V–belt – see operation Ribbed V–belt,
Remove and Install.
To Next Page
Loading...