1-2 Engine Mechanical Industrial 1.6L
Fastener Notice
NOTICE: Always use the correct fastener in the proper location. When you replace a fastener, use ONLY the exact part
number of that application.
PSI will call out those fasteners that require a replacement after removal. PSI will also call out the fasteners that require
thread lockers or thread sealant.
UNLESS OTHERWISE SPECIFIED, Do Not use supplemental coatings (paints, greases or other corrosion inhibitors) on
threaded fasteners or fastener joint interfaces. Generally, such coating adversely affect the fastener torque and the joint
clamping force, and may damage the fastener.
When you install fasteners, use the correct tightening sequence and specifications.
Following these instructions can help you avoid damage to parts and systems.
To Next Page
Loading...