1-90 Engine Mechanical Industrial 1.6L
KM–422 Installer
To press seal ring in camshaft housing
KM–427 Remover / Installer
To install guide pins into engine block
KM–470–B Angular Torque Wrench
To tighten cylinder head bolts
KM–471 Adapter
To check pressurized cooling system in conjunction with
cooling system tester
Special Tools and Equipment (Continued)
KM–498–B Oil pressure gauge
To check engine oil pressure in conjunction with
KM–135
KM–565–A Remover / Installer
To remove and install rocker arms and valve play
compensator
To Next Page
Loading...