1-92 Engine Mechanical Industrial 1.6L
MKM–611 Torque Wrench, 3/8”
Range 10 – 60 Nm / 7 – 44 lb. ft.
KM–634 Remover / Installer
To remove/install piston pin
KM–652 Flywheel Holder
To lock flywheel/drive disc
Special Tools and Equipment (Continued)
KM–658 Installer
To install crankshaft rear seal ring
KM–664 Reamer Set 7 mm
Valve guide ream (j 7 mm)
MKM–667 Pressure and Vacuum Pump
To check for leaks in vacuum unit
To Next Page
Loading...