Wallace Perimeter Security ALPHA - UL 325 Compliant Sensors

Alpha/Delta (Kinetic Operator) Installation and Maintenance Manual Revision 1 - MAY 2023
29
UL 325 COMPLIANT SENSORS
All external entrapment protecon
sensors must have NC sensor outputs
and be wired to the SENSOR COM
terminal for monitoring and powering
purposes. Depending on soware
version, the sensor becomes powered
when the gate operator’s motor
runs or is always powered when the
operator is connected to AC power.
UL 325 Compliant Sensors
The following sensors have been tested with Nice | HySecurity gate operators by an independent
laboratory and cered to comply with UL 325 7th Edion. Select sensors from this list for UL compliant
gate automaon soluons. Contact the sensor manufacturer for specic recommendaons for use.
Recommended External Entrapment Protecon Sensors List for the SmartDC Controller – Kinec Operator
Mfg. Part # or Model Brand Wallace Perimeter
Security Part #
Max. Range
Photo Eyes
(Retro-reecve)
E3K-R10K4-NR-1 Omron - 40  (12.2m)
NIR-50-325 EMX - 45  (13.7m)
IRB-RET EMX - 53  (16.1m)
E-931-S50RRGQ Seco-Larm - 46  (14m)
Photo Eyes
(Thru-Beam)
OVS-50TNR Optex - 33  (10m)
IRB-MON EMX 100620 65  (19.8m)
E-960-D90GQ Seco-Larm - 90  (27.4m)
Edge Sensors Senr Series ASO Safety 100543 -
CPT210-2U-#-T2 Miller Edge - -
Edge Sensor
Converters
Hy2NC (Converts 10K to
NC Monitoring)
HySecurity - -
Mul-Input Module The Soluon – MIM-62 Miller Edge - -