Wallace Perimeter Security ALPHA - Safety Information; Safety Notices; Common Industrial Symbols

Alpha/Delta (Kinetic Operator) Installation and Maintenance Manual Revision 1 - MAY 2023
19
SAFETY INFORMATION
Safety Noces
The following four levels of safety noces are used where applicable within this manual; each noce
contains informaon specic to the situaon.
Indicates death or serious injury will occur
if the hazardous situaon is not avoided.
Indicates death or serious injury could
occur if the hazardous situaon is not
avoided.
Indicates mild or moderate injury could
occur if the hazardous situaon is not
avoided.
Indicates damage to equipment is
probable if the hazardous situaon is
not avoided.
Common Industrial Symbols
The following internaonal safety symbols may
appear on the product or in its literature. The
symbols are used to alert you to potenal personal
injury hazards. Obey all safety messages that follow
these symbols to avoid possible injury or death.
Aenon - Take Noce
DANGER - Keep Away
Entrapment Zone
Possible Pinch Point
SAFETY INFORMATION