Wallace Perimeter Security ALPHA - Gate Operator Category and Usage Class Identification

Alpha/Delta (Kinetic Operator) Installation and Maintenance Manual Revision 1 - MAY 2023
27
IDENTIFYING GATE OPERATOR CATEGORY AND USAGE CLASS
Idenfying Gate Operator Category and Usage Class
The Kinec operator, according to UL 325 Safety Standards, falls in the Slide Gate category for gate
operators. Its usage class is determined by the area that the vehicular gate services.
Four dierent vehicular usage classes are dened by UL 325:
Class I
Class I: Intended for use in a locaon of one to four single family dwellings
or a parking area associated with one to four single family dwellings.
Class II
Class II: Intended for use in a commercial locaon or building such as
mul-family housing units (ve or more single family units), hotels,
garages, retail stores or other buildings servicing the general public.
Class III
Class III: Intended for use in an industrial locaon or building such as
factories or loading docks or other locaons not intended to service the
general public.
Class IV
Class IV: Intended for use in guarded industrial locaons or buildings
such as an airport security area or other restricted access locaon, not
servicing the general public, in which access is monitored by security
personnel or via closed circuitry.