Wallace Perimeter Security ALPHA - Page 18

18
wallaceperimetersecurity.comPhone: 866.300.1110
ALPHA/DELTA INSTALLATION & MAINTENANCE CHECKLIST
ALPHA/DELTA INSTALLATION AND MAINTENANCE
CHECKLIST
Checked Good Needs
Aenon
N/A
29� Conduits
All conduits must be nished to the applicable
electrical code(s) into the boom of the operator
cabinet only. This will help to prevent water entry
into the operator cabinet and will allow for proper
installaon of thermal cover (if required).
30� Motor Brushes
Check motor brushes for wear. Brushes should be
replaced every 2 years.
31� Thermal Cover/Thermostat
If supplied as part of the installaon, ensure the
thermal cover ts appropriately over the cabinet
and Velcro straps are appropriately fastened.
Installaon/removal of cover should be clearly
understood by end user. Thermostat is self-
regulang at 40.1°F (4.5°C).
Comments/Recommendaons:
Customer Signature: Customer Name (Print):
Signature of Maintenance Inspector: Maintenance Check Performed by (Print Name):
Date:
Date of next Maintenance Inspecon:
Cycle Count: